Important Considerations When Making A Wig - Darts

Darts are an inevitability for a wig maker. If you don't know what a dart is, then here's an explanation:

http://en.wikipedia.org/wiki/Dart_(sewing)

The reason they are found in hand-made wigs and larger hairpieces is because both a wig and a large hairpiece (that encompasses the curves of the head) are not a flat shape. When flat fabric needs to make a rounded skull shape, some form of dart is involved. Another reason you may run into them along your wig making journey is when making alterations to a wig.

As I have mentioned before on this blog, I recommend gaining some sewing skills before you set about hand-making wig foundations and large hairpiece bases. Both of these tasks require not only sewing skills such as knowledge of various sewing stitches, haberdashery and perhaps how to use a sewing machine, but also an innate understanding of how to use fabric to design and make something you are evisaging in your head.

There are a few rules that should be followed when making wig foundations and hairpiece bases that incorporate darts:

1. Unless the person you are making for has an uneven head shape (for some reason), aim to make the darts 'even'. That means: if you have a dart over one ear, you should have one over the other ear. In reality this usually means making the first dart smaller, and then making another dart the other side, taking up the rest of the slack you have realeased off the first dart you made (so basically halving the dart you had initially made). 
2. Darts on the side should be turned towards the back.
3. Darts on the crown and back should be turned towards the centre.
4. With wigs, if pinned correctely darts should not be placed on the vertex. 

Here is a primative drawing (!) I did - excuse the egg-head:

The red triangles are the 'darts', the blue line on the side view is the wig edge. The red line denotes the middle of the wig; it is helpful to mentally divide the wig down the middle so that you ensure you have an equal dart on the opposite side. You can see why you would want the darts to be even, as it helps to create a symmetary to the wig shape and ensure it fits properly without being bulky. 

Example of darts placement on a wig - note that each one is mirrored by an equal on the opposite side

Notes:

Re: #1 - When laying the lace/tulle/net/monofilament, or whatever fabric it is you are using to make the foundation/base, you will intially pin various points of the material and start to make darts as you lay and stretch the fabric to make the rounded scalp shape. As you then move further back, or around to the other side of the block/head, you will find that you need to unpin some points that you have already pinned in order to make the cap smooth and shaped correctly. In the case of darts, I try to pin both sides at the same time because I know I need to create an equal dart on the other side. I.e. if I am pinning a dart on the right side, I will start adjusting the left side in the same place/location, using temporary pins half-pushed-in (rather than completely pushed in/fixed) to hold sections, so that I create two equal darts on both sides, instead of one large one on one side. How many darts you end up using depends on the person's head shape that you are making the wig for, and how many pieces of material you are using to make the wig. Some wigs are made using only 1 type of material as the base. Others have several sections to their pattern and use a different piece of material for each section. Regardless, the same principle applies throughout.

Re: #2 and #3 - When you make a dart, you literally pull a section of fabric up in your hand and then fold it over, as it is essentially 'excess' material. You would then pin it, to hold the excess fabric in place while you pin the rest of the wig material onto the block. There are different types of darts used in dress making and other types of sewing, but usually in wig making, darts are triangular in shape because of the cap shape we are creating.

Here is an example of how a dart is created:

The blue arrow indicates the fabric being pulled over so that the two yellow lines meet (the yellow line edge of the fabric on the right side lays on top of the yellow line edge of the fabric on the left side). After pinning the whole wig, you would then sew along the pinned edge of each dart - along the yellow line, so that the fabric is joined together permanently and, most importantly, lies flat. I sew mine along both edges to make sure they are totally smooth and low-profile.

It is also imporant to follow a basic rule when marking darts on a wig:

Darts on the left - fold towards the right
Darts on the right - fold towards the left

Or... another way of looking at it = if you are making a dart on the side, you are folding towards the rear of the head/wig and if you are making a dart on the back, you are folding towards the opposite ear.

Re: #4 - As a general rule of thumb, it is less desireable to create darts on the vertex (the vertex being the top of the head from front harline to crown and from side to side before the head curves away). The reason for this is because you want the area everyone looks at (the top and front) to look seamless, and smooth... as if the person is not wearing a wig. Sometimes we have to make darts in this area due to the fabric being used and/or the shape of a person's head. In this case, it is very important to think about their placement. You want to think about the hairstyle that the wig will end up being styled in. E.g. if the wig is going to have a partline, don't make a dart that shows in this area. If the hair is going to be brushed back for some reason (ponytail or up-do or short hairdo) and/or you are creating a wig with a very fine, graduated hairline, putting a dart somewhere at the front will be more likely to show. Usually one would aim to have no darts on the front hairline, and if you need to put darts in the front section of the wig, then place them over the ears, or along a line around the crown (but avoiding any partline or open crown areas).

Example of a wig dart

Purple lines highlight the two darts -
one is deep over the ear, but misses the vertex and the other
is on the side pointing towards the crown, but again is hidden.

The Finished Wig Cap

Good news!


I have FINISHED the wig cap. Yay!


Here's some pics of it just perched on the wig block:

I am really pleased and proud that I managed to get it done. I think some people doubted I would ever finish it! 

As you can see, I have added an extended nape. The reason I have done this is because a. I wanted to learn to do it and see how it turned out and b. because I have very low babyhair and wanted to see if this would cover it - a bit of a prototype/test. If it's uncomfy to wear, I won't add one to the next wig. 

So the next step is ventilation. I shall be using some dark hair - a #2 (I am guessing) that is wavyish. It is currently ventilated into another wig that I have never worn because it is too small and WAY too dense (it weighs about 325 grams, which is approximately 12.5 ounces!!). The hair is not the best quality, so it is perfect for this project. I won't be crying if it all goes wrong! Hopefully it turns out well...

Finally... Pictures!

Since my last blog post, I have finally gotten around to taking some photos of the work in progress. Hopefully they will be helpful in illustrating what I have been, and am still, talking about and doing.

The update on making the wig foundation (wig cap) is as follows:

In the video I uploaded on YouTube, I was still working on getting the perimeter of lace and honeycomb tulle sewn down. I have now sewn the entire inside edge of the perimeter down, except for the extended nape.

This meant that I could, joy of joys(!), take the foundation off the block and... try it on! It also enabled me to remove the mould I had been using.

Trying it on - this was interesting! I was actually rather nervous about it - all this work so far seemed like a big time and energy investment, not to mention the financial aspect of purchasing all the supplies. Then there is that moment where you think: okay this could go either really wrong or really well. Funnily enough, my mind had not allowed for the middle option of: okay-ish. The result thus far (no hair on it, just the lace and tulle) is that it fits me okay. But - and this is a big 'but' for the perfectionist in me - is not quite as snug as I had hoped for at the front. I think for a first attempt it has been a good learning curve thus far and that it is a good outcome.

One thing I do know, is that undoubtedly I will have to use something at the ear tabs/sideburns area as it is too flappy. Those of you who have worn or tried on lace front wigs or glue-less lace wigs, will know exactly what I mean by that. This issue is compounded by the fact that the lace I have used is so fine and soft that it lacks any inherent structure. I shall have to look at how I can add more support and structure to that area. So far I have been thinking to add some wig springs (of the metal variety), but I am also looking into an alternative form of combs to the ones I have tried. I would not mind using combs if I could get them to grip my hair there. That is a big 'if', as up till now I have had no luck in that department due to a combination of a loss of density of my bio hair there and my hair being now very fine and slippery in texture. Ultimately, if I have to, then I will tape it down at that point, but of course I would rather not do this.

My next task is to sew the overlapping joins between the tulle and lace - I am already working on this. It means cutting the tulle down so that it fits just underneath the lace at the seam and then when I have done that, pulling the lace over the top and sewing the two down to create as smooth a line as possible on the top vertex.

One thing I have decided and learnt from the whole project - up to this point - is that I also want to try making a wig cap based PURELY on my measurements. That is to say, I will take a pattern of my front hairline, but aside from that I shall use the measurements to chart/mark out the pattern for the foundation on the wig block instead of using a mould. This is something that is instructed in all my wig making books, so at least I will have some plan to follow.

Another thing is that I may just go with the whole U-shaped vertex construction that you see on regular wigs - that is: a very fine (often a drawn through silk/French top) and then the sides and back (from crown to nape) being made with a more robust material (like the honeycomb tulle or stretch lace with wefts). I don't think I will do the drawn through option, but I might try doing honeycomb tulle everywhere except for the U-shaped vertex, which could be made from the fine lace. This might give the wig better stiffness at the sides, especially if combined with a metal spring.

I also - I know I am getting ahead of myself now, have it in my mind to try making a cap that does have a wefted back and sides, but sewn onto stretch lace in the manner of a sheitel (Jewish regular wig). Just to see how that works and turns out.

So many ideas and options... so little time and energy!

Progress

After my last post, I have made some more progress with the foundation. I have just posted a new video on You Tube talking about my issues - the stress situation - and showing how far I have come with the sewing of the galloon and lace etc.

So to further document the next stage I have completed:

I laid the honeycomb tulle down. Funnily enough, and again surprisingly, it took me ages to do this. I do think that laying lace and tulle is going to be a real area where practice makes perfect. I am sure that with time and repeating the exercise, I shall get quicker. I suppose one also gets to know one's head shape, so once you have darted and tucked it one time, if you are using similar materials the next time, you will probably be making darts and tucks in roughly the same places *assuming the foundation fits well the first time around*. The other thing about this is that, again, I found that after quite a while of struggling I gave up and then came back the next day and "boom" I did it very quickly. Perhaps the brain is assimilating information while I sleep?!

Sewing the darts in the tulle has now been completed. I experimented with polyester cotton in a fairly matching colour for the nape darts (they are quite big/thick due to my head shape). I am not so sure how I feel about the look of this thead though; it looks quite obvious to me compared to the effect achieved with transparent thread. This is not such a bad thing because the nape ones will be covered by hanging down hair. However the two upper darts that are around the crown area, I have sewn down with the transparent thread as I definitely did not want that bulky or possibly visible look up there. The thing is, with the tulle, I was wondering if it is better to sew with polyester cotton as the tulle itself seems to be made from something like cotton. I was thinking: will the transparent thread rub against the tulle and wear it down? I don't know! We shall see; time will tell. If it does, I can probably mend it. I suppose that is the advantage of doing it yourself - you can fix most things reasonably well.

I know I have probably said this before, but I definitely will... take some pictures of the canvas wig block so that I can post a few WIP (work in progress) shots.

A Stressful Week - Decisions

This week has been a bit stressful for me in terms of wig making.

The good news is that I have made progress with sewing the galloon and that is all done now. I am really pleased that I did finish that within the time frame I had given myself. I am making a real effort now to set myself mini targets and to stick to them as I know if I don't do this, I will never get anywhere with the wig making. For anyone else who is reading this and is thinking about having a go or who is already trying to teach themselves wig making, I would suggest that you do the same. Long term and short term targets are really valuable tools in motivating yourself. My short term target right now is to get this foundation (wig cap/base) finished. My mini goal is to finish sewing my first piece of lace down.

After I finished with the galloon, I started laying down my first piece of lace, which covers the: ear to ear, vertex and front hair line area. It took me a long while to do that; much longer than I anticipated. I think this was partly because I have the kind of head shape that requires some darts. I found it more challenging to lay down this lace than the tulle when I made the prototype. The area is slightly different because when I made the prototype I was constructing a circumference band type wig cap, whereas because I wanted to lessen the amount and appearance of galloon going over my vertex area, I decided to make the real wig cap with only one piece of galloon on the vertex, in addition to the perimeter galloon, and this piece goes over the crown area.

The key to laying lace is to get the front hairline as smooth and flat as possible. You don't want any bumps, lumps, ridges or wrinkles. Instead of stretching the lace to make it taut, you need to smooth it with your fingers and then pin in place. I found myself smooth and pinning, then smoothing and re-pinning as pinning in a new area kept creating undesireable wrinkling in other areas. I took the lace off several times and re-started. I think the key at the novice stage is:

• To have patience
• To not be afraid to re-start
• To take frequent breaks
• To come back again later if you can't do it and try again 

Sometimes it can be really hard to bear those things in mind; especially when you really want to get onto the next stage or just to finish something you had set your mind to doing. However, it is well worth taking the time to ensure that this bit is done correctly as it will make a big difference to the overall look and fit of the wig.

I thought I would have a couple of darts running from the galloon at the crown towards the front, however I ended up with one over each ear. When I made the tulle prototype, I believe I ended up with one over each ear and a couple on the top - so in a way, this may be better. The next step, which I have completed, was to sew the darts down. This helps to keep them smooth and flat.

After sewing the darts, I commenced sewing the lace onto the interior edge of the galloon. I have sewed two thirds of that and am just about to sew the last part (once I have finished writing this). I enjoy the sewing; it is quite therapeutic. I have been timing myself and I noticed I am definitely getting quicker the more I do it. I am hand sewing at the moment, but in the future I hope to try doing most or all of it on the sewing machine.

Once I have completed sewing the lace down, I can cut the excess off and start laying the next part down (the crown to nape).

Now onto the bad news...

I have had to make a decision over how to best ventilate the hair when I get to that stage. Several of my online friends and myself have wondered about the correct and optimum length of the returns (that is the piece of hair that is left and can stick out, sometimes called the mustache, when you make a knot with a hair strand). The wig making books that I have (I have 3), and that other people I know who are interested in wig making have, say one thing. Other people - on You Tube and at a wig making suppliers & a hair suppliers for example - were saying a variety of different things. I found this very confusing and completely overwhelming. Having so many different opinions stating this is how you should do it, makes it very difficult to judge which option or path to choose to go down. I started to feel like a cook who was in the middle of following a recipe and then had people saying: don't do that, it won't work out right, do this... The reality is that the length of the returns is important and a crucial part to get right of the whole wig or hair piece making process. Knowing that caused me to feel an intense amount of stress and pressure. No one wants to think they are going to expend all this effort and energy to get it wrong.

I have come to the conclusion that when you choose to attempt to make wigs, that canvas wig block, foundation and hair become your baby. To complete the task, a certain amount of dedication and enthusiasm is required and because most people who attempt to do it have great passion about what they are doing and want to achieve, it is hard not get really emotional about the whole process. For me, the learning curve continues. My lesson of the week has been to realise that I will make mistakes and to be prepared to pick myself up, dust myself down and try again.

Double Post Today - Finished The Top and Ordered Samples

This is my second post today as I answered a query about wig springs in my first, which you can find here:

http://makingwigs.blogspot.com/2011/06/wig-springs.html

I finally finished my practice top piece, which would constitute the area of a topper or a large closure or the top of a wig. I am quite pleased with it as I feel that I achieved the flow of the corners  and the crown hair falling down the back, which is why I wanted to make this - to learn how to do that. Here is the finished item:

I have now finished with the styrofoam head and moved onto using the canvas wig block. The other day I covered most of it in blue tape. If you want to know about this tape, you can read about it here: http://makingwigs.blogspot.com/2011/05/beginning-what-you-need-to-get-started.html

Bizarrely, I found covering the canvas wig head with the tape to be quite difficult as the head is rounded and the tape is straight and it's hard to cover it without making 'bubbles' and 'pleats' in it. In the end, I made a few slits in the tape where it wanted to make a pleat and this seemed to help to avoid lots of bumping.

The finished product - this photo shows the front; the back has the blue tape extending down the entire length of it.

My next project is to make more of a regular-style wig cap (foundation). To do this you need galloon, which I don't have yet. So I am utilising some ribbon that I have in my sewing supplies and which I will not be using for anything else. I prefer to use things up that I already have as I am only learning and I would rather not waste good money on things I end up chucking away. At some point, I will post a new entry about the process of making a regular-style wig cap. I am trying to take photos as I go along so that it is helpful to others who may wish to have a go at making something similar.

In the meantime, I managed to order my set of samples from another wig making supplies company; these samples are all types of foundation materials and ribbons. Ordering them has cost me quite a bit of money, as I have to pay to get them from abroad, but it is a necessary step and expense. If I was going to make a lace wig - full or lace front, I would only need lace. However, because I want to make a regular-style wig that is fully hand tied, I need to see what other materials are available so that I can design a custom wig cap that will suit me and my needs.