Important Considerations When Making A Wig - Darts

Darts are an inevitability for a wig maker. If you don't know what a dart is, then here's an explanation:

http://en.wikipedia.org/wiki/Dart_(sewing)

The reason they are found in hand-made wigs and larger hairpieces is because both a wig and a large hairpiece (that encompasses the curves of the head) are not a flat shape. When flat fabric needs to make a rounded skull shape, some form of dart is involved. Another reason you may run into them along your wig making journey is when making alterations to a wig.

As I have mentioned before on this blog, I recommend gaining some sewing skills before you set about hand-making wig foundations and large hairpiece bases. Both of these tasks require not only sewing skills such as knowledge of various sewing stitches, haberdashery and perhaps how to use a sewing machine, but also an innate understanding of how to use fabric to design and make something you are evisaging in your head.

There are a few rules that should be followed when making wig foundations and hairpiece bases that incorporate darts:

1. Unless the person you are making for has an uneven head shape (for some reason), aim to make the darts 'even'. That means: if you have a dart over one ear, you should have one over the other ear. In reality this usually means making the first dart smaller, and then making another dart the other side, taking up the rest of the slack you have realeased off the first dart you made (so basically halving the dart you had initially made). 
2. Darts on the side should be turned towards the back.
3. Darts on the crown and back should be turned towards the centre.
4. With wigs, if pinned correctely darts should not be placed on the vertex. 

Here is a primative drawing (!) I did - excuse the egg-head:

The red triangles are the 'darts', the blue line on the side view is the wig edge. The red line denotes the middle of the wig; it is helpful to mentally divide the wig down the middle so that you ensure you have an equal dart on the opposite side. You can see why you would want the darts to be even, as it helps to create a symmetary to the wig shape and ensure it fits properly without being bulky. 

Example of darts placement on a wig - note that each one is mirrored by an equal on the opposite side

Notes:

Re: #1 - When laying the lace/tulle/net/monofilament, or whatever fabric it is you are using to make the foundation/base, you will intially pin various points of the material and start to make darts as you lay and stretch the fabric to make the rounded scalp shape. As you then move further back, or around to the other side of the block/head, you will find that you need to unpin some points that you have already pinned in order to make the cap smooth and shaped correctly. In the case of darts, I try to pin both sides at the same time because I know I need to create an equal dart on the other side. I.e. if I am pinning a dart on the right side, I will start adjusting the left side in the same place/location, using temporary pins half-pushed-in (rather than completely pushed in/fixed) to hold sections, so that I create two equal darts on both sides, instead of one large one on one side. How many darts you end up using depends on the person's head shape that you are making the wig for, and how many pieces of material you are using to make the wig. Some wigs are made using only 1 type of material as the base. Others have several sections to their pattern and use a different piece of material for each section. Regardless, the same principle applies throughout.

Re: #2 and #3 - When you make a dart, you literally pull a section of fabric up in your hand and then fold it over, as it is essentially 'excess' material. You would then pin it, to hold the excess fabric in place while you pin the rest of the wig material onto the block. There are different types of darts used in dress making and other types of sewing, but usually in wig making, darts are triangular in shape because of the cap shape we are creating.

Here is an example of how a dart is created:

The blue arrow indicates the fabric being pulled over so that the two yellow lines meet (the yellow line edge of the fabric on the right side lays on top of the yellow line edge of the fabric on the left side). After pinning the whole wig, you would then sew along the pinned edge of each dart - along the yellow line, so that the fabric is joined together permanently and, most importantly, lies flat. I sew mine along both edges to make sure they are totally smooth and low-profile.

It is also imporant to follow a basic rule when marking darts on a wig:

Darts on the left - fold towards the right
Darts on the right - fold towards the left

Or... another way of looking at it = if you are making a dart on the side, you are folding towards the rear of the head/wig and if you are making a dart on the back, you are folding towards the opposite ear.

Re: #4 - As a general rule of thumb, it is less desireable to create darts on the vertex (the vertex being the top of the head from front harline to crown and from side to side before the head curves away). The reason for this is because you want the area everyone looks at (the top and front) to look seamless, and smooth... as if the person is not wearing a wig. Sometimes we have to make darts in this area due to the fabric being used and/or the shape of a person's head. In this case, it is very important to think about their placement. You want to think about the hairstyle that the wig will end up being styled in. E.g. if the wig is going to have a partline, don't make a dart that shows in this area. If the hair is going to be brushed back for some reason (ponytail or up-do or short hairdo) and/or you are creating a wig with a very fine, graduated hairline, putting a dart somewhere at the front will be more likely to show. Usually one would aim to have no darts on the front hairline, and if you need to put darts in the front section of the wig, then place them over the ears, or along a line around the crown (but avoiding any partline or open crown areas).

Example of a wig dart

Purple lines highlight the two darts -
one is deep over the ear, but misses the vertex and the other
is on the side pointing towards the crown, but again is hidden.

Making a Wig Foundation with Lace - Important Considerations ~ Laying Your Lace

I had a query today about how I made the parting on the wig I am making, as it appears so clearly defined and straight. It got me thinking about some of the things I have learnt since starting to experiment with making wigs. One thing I remember researching a lot is: wig foundations (bases/caps). Reason being: a. this was something I am quite obsessive about (due to my hair loss and needing comfort and realism) and b. because if this aspect is not quite right, then the whole thing is pretty much wrong!

When you make a foundation (wig base/cap) with lace, you really need to take your time. There are a few things that it is important to get right at this stage, as they will otherwise affect the wig at a later stage when it is impossible to rectify them.

One of the aspects of making a foundation that needs to be taken into account is how you place your lace. Let's rewind a bit...

When you want to make a foundation, you need to take either a head mould or some measurements of the head that you will be fitting the wig foundation to, and then transfer these onto your canvas or wooden block. Of course, you can take both a head mould and measurements and use them together if you so desire. In my case I am currently using a canvas block, so I put blue tape over it, which allows me not only to have better vision as it makes the lace and hair more contrasting against the block, but also gives me the ability to mark out patterns, measurements and shapes on the block to help me with making the foundation and later ventilating the hair. Once I have marked the block with the head pattern I need to follow, I then take the lace and start to pin it to the block to make the 'form' of the foundation, which can then be sewn where necessary.

At this stage it is vital that one takes into consideration the direction of the lace holes on the different parts of the head/wig. For example, like fabric, regular lace (not the stretch kind) has a bias which means that if you pull it when it is oriented in this position, it will stretch or give somewhat. You do not want to pin the lace when it is on the bias, as it will have stretch to it. If you don't know about the bias of material, then take a fresh piece of square or oblong lace, and hold it on the diagonal (like a diamond shape). Gently tug the corners. You will see it stretches or gives slightly. This is the bias. You would not want to pin the fabric with this being on your vertical or horizontal part of the wig (so not on the front to nape or ear to ear over the top) as otherwise the wig will stretch and move in a most undesirable way.

One of the main areas you want to carefully lay lace is the front hairline to crown. This is the part which everyone looks at the most when they are talking to or interacting with someone wearing a wig. Ideally on the front hairline to the crown AKA the vertex, the lace holes should be marching straight backwards in a nice line and straight across the head in another straight line - you would see the holes lining up in rows going across the head, and rows going backwards towards the crown - not on the diagonal. If you pin your lace on the bias in this area, the holes will be on the diagonal and not straight down and across. This would cause a problem when you came to ventilate the hair onto the foundation as the hair would not fall into part-able rows. It would be criss-crossed.

Here is an example of pinning the lace and the lace direction.This image should be clickable to enlarge. See the picture below for a close up of the lace holes. The arrows and lines represent the two directions of the hole: straight from the crown to the front, and across from left to right.

Note how I am smoothing the lace in the vertex section to get it nice and taut.

By following this structure when pinning your lace to the block, you should end up with rows of hair that can then be parted from front hairline to the crown as a normal part line would be. For some people this is too linear and perfect, in which case you can just part a messier parting by carefully using your comb in a more random zig-zag manner when making the part line. My own bio hair always had a very linear part line for some reason, which is why I tend to favour that a little.

 You can see the orientation of the lace holes on this picture more clearly, and how it produces a very crisp part line. In fact, if you ventilate more heavily than I do, the part line will look even more delineated because it will be denser hair around the parting.

There is second consideration when laying the lace onto the block. It is important to lay the lace for the front hairline to the crown as flat and taut as possible. You do not want this material to be rucked up, as if it is the wig will not lay flat or moulded well to the head/scalp shape. This is the case for all wigs, but is especially noticeable in lace front and full lace wigs, because you need the lace to adhere flat to the skin where you are bonding in order for it to look flawless and undetectable. If you have too much material or it was not pulled taut and smooth when making the foundation, you will end up with small gathers in the lace when you bond, which causes a rippling effect against the skin. This can also happen if the wig is too small and is pulling at the skin. For this reason, keep smoothing the lace fabric down gently with the palm of your hand as you pin; you may find you need to unpin, smooth and re-pin as you go. One of the reasons for this is because as you pin in another place on the block, you may find the way you have already pinned it elsewhere is not optimal and needs to be adjusted. A little bit fiddly, but worth the effort in the long-run.

I shall continue this mini series with a further couple of posts about other things that are wise to take into account when making your foundation and laying your lace down.